C.I.P. (Corrosion Inhibiting Primer) is recommended for all severe environmental conditions:marine or tropical climates, corrosive fumes, protection of motor vehicles, construction equipment and ballast tanks of ships as well as everyday items i.e. railings, gates….
It is especially recommended for the protection of vintage or classic cars, tractors, machinery etc where cellulose or two part paints are used. If it has bad, scaly rust, saturate that first with Owatrol Oil (also on this website) and after a few hours that scaly rust can be scraped off with the greatest of ease using an ordinary paint scraper etc. Please take a few moments to read about how the Owatrol Oil works on rust etc. If you plan to paint using a strong solvent or 2 pack paint for finishing, you will need to apply a coat of CIP on top of the layer of Owatrol Oil. Reason being, those paints react if applied directly on top of a surface treated with Owatrol Oil. Another great application for CIP is on new steel or sections you have welded together to replace old rusted parts etc.
The C.I.P. is especially recommended where a high resistant paint or two-pack finish (urethane, epoxy, chlorinated rubber, synthetic) is to be applied or necessary.
€91.91Add to cart
With the C.I.P. sand or shot-blasted surfaces do not require immediate priming; a light rust coating will not affect its performance or the final result.
Application tools :brush - roller - airless spray
Application temperature :+5°C to +30°C
Drying :6 h.